Mosmatic makes your work easier with an “all in one” product for effective and efficient cleaning of public spaces like railway stations, parks or school grounds that are covered with hundreds of unsightly wads of chewing gum. The gum is broken up and removed by the special nozzle attached to the back of the surface cleaner. This means that the surface cleaner takes care of chewing gum in an eco-friendly way without using chemical detergents.
The special nozzle for removing chewing gum is installed on the back of the surface cleaner and, together with the high-pressure pistol mounted on the left, can be turned on when needed. Several small nozzle outlets break up the chewing gum into many small pieces. A fast and effective way of dealing with hardened chewing gum.
The used water including the residue is suctioned through the double-walled housing. Using a recycling system, the water can be recovered. The process is eco-friendly because the water that has already been used during cleaning can be used again.
Height adjustable housing
Different floor textures require height-adjustable housing. Four adjustable screws are used to adjust the housing to the floor. The suction power is also significantly improved by adjusting the housing.
High quality swivel
The centerpieces of a Mosmatic Surface Cleaner is it’s swivel. It is reinforced with self lubricating, stainless steel ball bearings with a carbide gasket system. They are specially designed for high revolutions ensuring long lasting durability.
The turbo rotary arm must withstand high revolutions, so a precision robot takes over the necessary welding tasks. The rotary arm is also counterbalanced and precisely equilibrated, which prevents dangerous vibrations.
Ease of use and fatigue-protection thanks to a high-pressure pistol with ergonomic relax-action function.
The brush ring prevents splashing and injuries from loose pebbles. It is soft and elastic but extremely effective thanks to the thickness of the bristles. It is also available with a plastic ring for interior cleaning.
The surface cleaner can be manoeuvred easily and quickly, saving you time and energy.
If the surface cleaner is not in use, the fork support prevents the fork from coming into contact with the floor.
Polished stainless steel (INOX)
A Robust and an optically elegant design are the priorities Mosmatic sets for its products. There is no question of using anything but polished stainless steel (INOX) for all of our products.
The surface cleaner is delivered almost completely pre-assembled. After opening the carton, the fork just has to be assembled with the housing, high-pressure pistols and hoses according to the instructions enclosed. The surface cleaner is then immediately ready for operation.
- Inlet: 3/8″FPT
- Pressure: 5000PSI
- Temperature: 250F Degree
(80.786) FL-AHB-KAU520, 21″, 1xDYCI Swivel, 2×1/8″FPT RotorArm. 2×1503 Nozzles, 2xHP-Gun, 4×4″Stainless Steel Castor, with Brush Ring (cat#92003)
(80.787) FL-AHB-KAU520, 21″, 1xDYCI Swivel, 2×1/8″FPT RotorArm. 2×1503 Nozzles, 2xHP-Gun, 4×4″Stainless Steel Castor, with Plastic Ring (cat#92003.1)
(80.788) FL-AHB-KAU750, 30″, 1xDYCI Swivel, 3×1/8″FPT RotorArm. 3×1503 Nozzles, 2xHP-Gun, 4×4″Stainless Steel Castor, with Plastic Ring (cat#92003.2)
(29.102) Poly Nozzle for Gun Remover, Poly-1 030G1/4″F 5000PSI 90 Degree(cat#92003.3)